Client Billing

Lift bills your clients for you. You give each client a rate card. Lift counts the work your team does for them (receiving, storage, picking, packing, labels, kits and work orders), and after each month closes it drafts one invoice per client from that client's card. You review the draft, finalize it, and send it as a PDF or through QuickBooks Online.

This page is about the invoices you send your clients. For your own OpenBoxes Lift subscription, see Billing & Plans.

Client billing lives under Client invoicing in the portal sidebar.

Watch the video: Close the Month and Invoice a Client (1 min) reviews the invoice Lift drafted from a client's rate card, finalizes it, and downloads the PDF for the client.

Rate cards#

Each client has their own rate card. A new card takes effect from the start of a month.

  • Open the client under Client invoicing and choose New rate card. Start from a blank card, from this client's current card, or from a template. A template is a starting point: copy it to a client, then adjust the prices for that client.
  • Edit the lines, then Save draft. When it is right, choose Activate and the month it starts. From that month the client is charged on this card, and the previous card stops applying. An activated card cannot be edited; to change prices, choose Copy to a new draft.
  • A card can take effect up to 24 months ahead, and holds up to 200 lines.

Each line has a Charge, a Price, an optional amount Included each month, and whether it is Taxable. The charges are:

  • Receiving: Receipt, Unplanned receipt, Receipt line, Unit received, Damaged unit received.
  • Per pallet received / per carton received. Counted by your team on the receipt (Inbound, the ASN, Pallets and cartons, or when you close it). The fields start from the counts the ASN declared. Charged when the receipt closes; a later change is corrected on the next invoice. If a receipt is closed without a count and the client's card charges for it, the draft invoice waits for you to enter the count or to bill no count for that receipt.
  • Fulfilment: Order, Pick line, Unit picked, Batch, Package, Packing material (a price per box size), Unit returned to stock (put back after a cancel).
  • Labels: Label fee, Postage, Signature option. Postage passes the label cost through, either as Label cost, no mark-up or as Label cost plus a percentage.
  • Kits: Kit assembly (each kit assembled at packing), Subscription box, Kit built ahead.
  • Returns: Customer return processed (one per return received), Customer return unit received, Customer return restocked, Customer return quarantined, Customer return disposed of, Customer return sent back to you (one per shipment). A return whose reason is shipped in error gets no return charges; units kept in the quarantine bin still bill storage. See Returns.
  • Storage: Storage per bin per day, Storage per unit per day, storage by location type, or cubic feet by location type (see Storage by location type).
  • Value-added services (work orders), by the hour or per item (see Work orders).
  • Pack-station extras: a per-item service added while packing (gift note, insert, special packaging), billed under the service's per-unit price when the order is packed. Cancelling or returning the order does not refund it unless you credit it on the order page.
  • Fees: Monthly fee (see Fixed monthly fees).

A card can also carry a monthly minimum, counted on services only (not postage) or on everything including postage. When the month's charges come to less, the invoice adds a Monthly minimum adjustment. Fixed monthly fees do not count toward the minimum.

Fixed monthly fees#

Under Fees, add a Monthly fee for anything you charge the same amount for every month, such as account management. Give each fee a name: your client reads it on the invoice. Every monthly invoice for the client then carries one line per fee at the full price, whatever the month's activity. A client's first month is charged the whole fee even when it starts partway through; there is no proration. A month wholly before the client's billing start gets no fee and no monthly minimum.

On a draft invoice, you can Waive each fee line (it stays on the invoice at 0.00, marked waived) or Change it to another amount. Both need a reason, and Use the card price undoes either. Fees show on the PDF and the usage CSV, and they go to QuickBooks Online like any other charge once you match them to a QuickBooks item. One-off charges, such as a setup fee, are added with Add a line on the draft.

Work orders#

Work orders are for work you bill outside your usual handling, like relabeling, kitting or a special count. First add your services under Work orders, Services. Each is charged by the hour or per item. For an hourly service you choose how time rounds up (to the minute, or every 5, 6, 10, 15, 30 or 60 minutes) and an optional minimum per job. Set each service's price on the client's rate card: per hour for time, per task for tasks. A per-task price can have an amount included each month; an hourly price cannot.

Add a work order from the Work orders page, or with Add work order on an order, an inbound receipt or a return. Each line is a service with how many people and how long each worked (hours and minutes like 1:30, or minutes like 90), or a count for a per-item service. Nothing is billed until you complete the work order. When you complete it you choose the day, up to 62 days back, or complete it with no charge. Lift adds up the time per service, rounds it up and applies the minimum once per job.

When a work order is completed, its time and tasks go on that month's invoice at the client's rate card, one line per service. Time is billed to the minute at the hourly price, so 10 minutes at $37.00 an hour is $6.17. Work completed for a month you have already invoiced goes on the next invoice at that earlier month's price. A correction that takes time away is credited at the price the work was billed at, never more than was billed. If the rate card has no price for a service, the draft invoice shows the work at 0.00 until you set a price for that month, bill nothing for it, or move it to next month. Work-order lines are not edited on the invoice: correct the work order instead.

A completed work order is not edited. An owner, admin or manager can correct it with a reason, which adds a charge or a credit on the client's next invoice. Cancelling a completed work order credits everything billed for it.

Extras at the pack station#

Some services are done to one order while it is packed, like a gift note, a flyer insert or special wrapping. Mark a service charged per item as Offer at the pack station under Work orders, Services. The pack station then shows an Extras step for every order: the packer taps plus or minus to record how many were added. Nothing is billed until the order is finished at the pack station. The extra is then billed per item at the price the client's rate card gives that service (Value-added service, per unit). If the card has no price for it, the invoice draft shows it at 0.00 for review, where you can set a price.

Only a service charged per item can be offered at the pack station. A service charged by the hour is recorded on a work order instead.

Extras are not refunded automatically, including when an order is cancelled or returned after it was packed. To credit one, for example a mistaken extra on a shipped order, open the order, find Extras added at packing and choose Credit (owner, admin or team manager), with a reason. The client sees the credit on their next invoice. Each extra can be credited once, in full.

What your client sees#

When an invoice that bills work orders is issued, your client sees them in the client portal, under the invoice's charges: each work order's number, title, service, the day it was completed, the time (in hours and minutes) or the count, and the delivery or return it is linked to. They never see the note, who did the work or the reason for a correction. An owner or admin can choose Hide from the client on any work order, open or completed, to leave it off their list; it is still billed. A correction made after an invoice was issued appears on the next invoice that carries it, marked as a credit or as added to work billed earlier.

Storage days#

Storage is charged per bin or per unit, per day:

  • Storage per bin per day counts each bin holding the client's stock, each day.
  • Storage per unit per day counts each unit of the client's stock, each day.

Lift takes the count from each day's stock count. Stock still in a receiving bin is not charged until it is put away. If a day's count does not arrive, Lift uses the day before for that day and says so on the draft invoice: "N storage days were estimated from the day before, because no stock count arrived." A later count corrects the bill on a following invoice.

Storage by location type and cubic feet#

Storage types are the kinds of locations you store client stock in, like a bin, a shelf or a pallet position. Add them under Client invoicing, Storage types. Every bin starts as Bin.

On a client's page, the Bins card shows each bin's storage type. Tick bins, pick a type and the day it starts, and choose Assign. A type change can start in the past, but never inside a month you have already invoiced for that client. Invoiced months keep the types they were billed with.

Give a type a cubic size if you charge storage by the cubic foot. A size change starts on the first day of the current month at the earliest. Retiring a type keeps it on the bins that have it. No more bins can be set to it until you restore it.

Storage by location type prices each location type on the rate card, like Bin, Shelf or Pallet position. Each line has a basis: per day, monthly average, snapshot on the 1st, or monthly peak.

  • Per day bills every location the client's stock fills, every day. A per day line counts location days (cubic foot days on a cubic card).
  • Monthly average bills the month's location days divided by the days in the month.
  • Snapshot bills the locations filled on the first day of the month.
  • Monthly peak bills the most locations filled on any day of the month.

Cubic-foot storage is the cubic size you give each location type, times the locations the client's stock fills each day.

A rate card uses one way of charging storage. A 3PL that charges small parts per unit and pallets per pallet sets the small-parts bins up as their own location type.

A snapshot or peak charge bills the whole month, even if the client leaves early. In the client's first month, a monthly average counts only the days from the billing start, so it bills part of a month. Per day does the same. A snapshot is taken on the billing start day and bills a whole month. A snapshot is taken on one day a month: the 1st, or the billing start day in the client's first month. Snapshots on more than one day are not available.

Lift reads each bin's location type on each day. A type change in a month you have not invoiced yet changes that month's storage the next time the invoice is re-rated. Invoiced months keep the types they were billed with.

If a location type has no price on the rate card, the invoice gets a line to review instead of charging nothing. The same happens for a location type with no cubic size on a cubic card, and for days with no location records. Give the type a size and draft the month again, enter the missing day's locations by type (Enter the day, or Enter the missing days, on the line; or Enter a storage day on the client's Bins card) and rerate, or reject the line to bill nothing for it.

You can enter a storage day by hand: yesterday, or up to 62 days back. Give the number of locations of each storage type the client's stock filled that day, or tick Nothing was stored that day, and a reason. What you enter replaces that day's records. A day in a month not yet invoiced bills when you rerate the draft; a day in a month already invoiced bills as a correction on the client's next draft.

If several days in a row, or the start of the month, had to be estimated from an earlier location count, the invoice gets a line to review. Accept it to bill the estimate, or reject it to bill nothing for those days. If a snapshot or peak charge depends on a day with no location records, the line is held at 0 for review instead of charging nothing.

If Lift finds a change in a month you already invoiced, such as a corrected day, the next invoice gets a line for the difference, at that month's prices. It can be a charge or a credit. If that month had estimated days you rejected, or a charge held for a missing day, the change waits on the next invoice for you to decide: accept it to bill or credit it, or reject it to leave it unbilled.

A storage line by location type cannot be overridden on the invoice. Add a manual line to adjust it. A rate card that charges by location type or cubic foot can start no earlier than the first day Lift has location records for that client.

The monthly draft invoice#

The billing month is a calendar month in your warehouse's time zone (the one set under Orders, Order settings). Early on the first day of the next month, once the month's last stock count is in, Lift drafts one invoice per client from the client's rate card.

Go to Client invoicing, Invoices to see them. An invoice is Draft, Final, Sent or Void.

On a draft you can:

  • decide each line under Needs review, when there are any: Accept keeps it, Reject removes it for good (with a reason), and Defer to next month moves it to next month;
  • Add a line for anything else, up to 100 lines a month (a minus sign makes a credit);
  • write a Note to the client, up to 500 characters;
  • Rerate the draft, for example when work for the month arrived after the draft was made;
  • Download draft PDF to check it. A draft PDF carries a DRAFT watermark.

"No price for this service": set a price for the service for this month (per hour for time, per task for tasks), bill nothing for it, or move it to next month.

If the month has labels you bought outside Lift (the Labels bought elsewhere label source), the draft says how many: "N labels were bought outside Lift, so this invoice has no postage for them." Each one you did not remove counts toward the Label fee, but Lift never saw the postage. If you pass postage on to the client, add what you paid with Add a line. See Pick, Pack and Ship.

When the draft is right, choose Finalize, then Finalize and number it. Finalizing gives the invoice its number and fixes it.

Voiding. A final invoice that has not been sent can be voided with a reason (Void, then Void invoice). The month then shows under Needs your attention at the top of the Invoices page, where Draft again makes a fresh draft. The same panel lists any client with no active rate card.

Sending the invoice to your client#

There are two ways:

  • Download the PDF and send it yourself. Open the invoice and choose Download PDF.
  • Push it to QuickBooks Online (below), and send it from QuickBooks, or let QuickBooks email it.

QuickBooks Online#

Connect your QuickBooks Online company once, and Lift puts each client invoice in QuickBooks when you finalize it.

  1. Connect. Open the QuickBooks page at https://app.openboxes.cloud/integrations/quickbooks/launch (an invoice's QuickBooks panel links to it too) and choose Connect to QuickBooks. You sign in to QuickBooks and choose the company to connect. Lift stores the connection encrypted, and nobody at OpenBoxes Lift sees your QuickBooks password. Only the account owner or an Admin can connect or disconnect.
  2. Match your records. Under Match your QuickBooks records, match each charge to one of your QuickBooks service items, and each client to a QuickBooks customer. Choose an existing one, or Create in QuickBooks. Choose the Income account for new items that Lift creates.
  3. Finalize as usual. Once a client and its charges are matched, finalizing an invoice puts it in QuickBooks, with its date, due date, customer, note and one line per charge. If a push fails, the invoice shows it and Retry sends it again; Push to QuickBooks sends one by hand.

Who emails the invoice. QuickBooks can email it for you. The setting QuickBooks emails each pushed invoice is on the QuickBooks page and is off to start with:

  • On: QuickBooks emails the invoice to the client's billing email in QuickBooks, once, right after Lift puts it there.
  • Off: the invoice waits in QuickBooks. Send it from QuickBooks yourself when you are ready.

When your QuickBooks company is connected, the client invoice is the one QuickBooks sends, and the PDF in Lift becomes an internal summary (Download internal summary).

You can disconnect at any time, from the QuickBooks page (Disconnect) or from QuickBooks itself. Invoices already in QuickBooks stay there.

Payment status#

The Invoices page shows whether each final invoice is Unpaid, Partly paid or Paid, and which are past their due date. You can filter by payment status.

  • Invoices in QuickBooks Online. Normally about every 30 minutes Lift reads each pushed invoice back from QuickBooks and shows what QuickBooks says, so a payment you record in QuickBooks can take up to half an hour to show. Check now on the invoice reads it at once. Once QuickBooks shows a payment on an invoice, or shows it emailed, the invoice counts as sent and can no longer be voided in Lift: put any correction on a later invoice as a credit.
  • Invoices not in QuickBooks. The account owner or an Admin chooses Mark as paid when the client has paid in full, and Mark as unpaid to undo it. An invoice marked paid cannot be voided, and Lift does not put it in QuickBooks.

Lift shows the status and nothing more. It never collects a payment, charges your client or reminds them.

What your clients see. Nothing, until you choose. Under Client invoicing, Payment status for clients, pick Do not show (the starting setting), Paid and unpaid only, or Including overdue. A client sees the status of their own invoices only, never how much has been paid or is still owed.